Open 24/7 · R350 call-out fee · Price agreed on site before work startsPay by EFT, cash or card
Booking a locksmith

Locked Out of Your Café or Restaurant at Opening Time

In short:

  • Most opening-time lockouts come down to one of four things: the key holder isn't there, a padlock has seized, the roller shutter won't lift, or the glass door lock has failed.
  • Check for signs of a break-in before you touch anything. If there are any, phone the police on 10111 first.
  • Never try to adjust roller shutter springs yourself. Manufacturers warn that released spring tension can bring a door down with force.
  • A simple key register and two trusted openers prevent most of these mornings.
  • We handle shopfront locks, padlocks, roller shutter locks, mechanisms, springs and motors. The R350 call-out covers the visit and the work is quoted on site.

Why opening-time lockouts happen

Hospitality runs on early starts. The bread delivery is at the door, the first regulars are walking past and the person with the keys hasn't arrived. Sometimes it's the hardware that lets you down. Knowing which problem you're facing tells you who to phone first.

Common opening-time problems
What you findLikely causeFirst safe check
Nobody on shift has a keyThe key holder is off sick, late, or has left with the keysPhone every person on the key register; check for a sealed spare held by the owner
Key goes into the padlock but won't turnGrit, salt or rust inside the padlock, or a bent keyTry the spare key; look for a bent shackle or a damaged keyway
Shutter unlocks but won't lift, or lifts unevenlyLocking bar not fully withdrawn, a jammed slat, a spring or motor faultCheck all locking points are released; look for anything blocking the guide channels
Motorised shutter does nothingPower, remote or motor faultCheck the power supply and the remote's battery; follow the manual-override steps in your installer's instructions
Key turns in the glass door but the door stays lockedWorn lock, a dropped door or a floor-lock faultDon't force it; note what the key and the bolt are doing
Key snaps in the lockWorn key, stiff lock, or too much forceLeave the broken piece where it is; don't try to dig it out

If the shutter has been tampered with, a padlock has been cut or a door has been forced, don't open up. Phone SAPS on 10111, keep staff away from the area, and call us once the police have done what they need to. Our break-in repair service covers the damage afterwards.

Roller shutters and padlocks

Shutter housing (spring or motor inside)Padlocked locking pointsDoor lock Guidechannel
Illustration The parts of a typical shopfront that most often hold up an opening: shutter locking points, padlocks, the shutter housing and the glass door lock.

Shutters. A roller shutter that won't lift is tempting to yank. Don't. Shutter and roller door makers are blunt about the spring: Steel-Line tells owners not to attempt to tension a roller door themselves because of the risk of serious injury or death, and warns that loosening the U-bolts can release spring tension and bring the door down forcefully. If the shutter feels much heavier than usual, sits crooked or drops when you let go, stop and call for help.

Trellidor's roller shutter care guide says not to spray lubricant into the motor and that opening the motor box voids the warranty. It also links cleaning frequency to how close you are to the sea, from every one to two weeks within 500 metres of the beach to every six months more than 10 km away. Salt and fine sand are part of life for shopfronts near the water.

Padlocks. Shutter padlocks sit at ground level, where they collect water, grit and salt. Keep them off the ground where you can, wipe them down when you clean the shopfront, and replace any padlock that has started to stick before it fails on a cold morning.

Glass shopfront doors

Frameless glass doors and narrow aluminium shopfront doors use slim locks that don't tolerate much movement. A door that's dropped a few millimetres, or a floor spring that's tired, can stop the bolt lining up even though the key turns.

  • Don't lever the door or push hard on the glass to "help" the bolt. Glass doors and their fittings aren't made to take that kind of load.
  • Note whether the key turns fully, partly or not at all, and whether you hear the bolt move.
  • Take a photo of the lock and of the gap between the door and the frame.

Our guide to glass shopfront door locks goes into the common faults and fixes in more detail.

A calm order of steps on the morning

  1. Look before you touch. Any sign of forced entry means police first.
  2. Phone every key holder. Work down your key register, and phone the owner about any sealed spare.
  3. Use the other door only if it's a normal entrance. A back or service door is fine if staff use it every day. Don't climb through windows or over walls.
  4. If you're in a building or centre with security, tell them a locksmith is on the way and where the van can stop.
  5. Call us with the address, the type of door or shutter, and photos. We're open 24/7.
  6. Tell suppliers and staff what's happening, so deliveries wait and nobody tries their own fix.

Staff key control so it doesn't happen again

Most opening-time lockouts are really key-management problems. A one-page register, kept up to date, fixes a lot.

A simple key register
KeyHeld bySigned outReturned
Front doorManager; head chefDate and signatureDate and signature
Shutter padlocksOpening managerDate and signatureDate and signature
Back door and store roomKitchen leadDate and signatureDate and signature
Sealed spare setOwner, off siteSeal numberSeal checked
  • Always have at least two people who can open, on different shifts.
  • Collect keys on the last day of anyone who leaves. If keys aren't returned, change the cylinders those keys open.
  • Keep a sealed spare with the owner, not in the car of whoever closed last night.
  • Record padlock and cylinder brands so you can describe them in a hurry.

We don't cut or copy keys, so extra spares come from a key-cutting shop. Changing cylinders after a staff member leaves is part of our lock replacement work.

What we need from you

  • Proof that you're entitled to the premises: your ID with a lease, a business registration document or something similar, or the owner on the phone.
  • Photos of the shopfront, the shutter's locking points and padlocks, and the door lock.
  • For motorised shutters and gates, the motor brand if you know it.
  • What happened: keys missing, key snapped, shutter jammed halfway, motor silent.
  • Where the technician can park and which entrance to come to.

How it works and what it costs

Our commercial locksmith service covers shops, cafés, restaurants, bars and offices. Roller shutter doors and gates, including their locks, mechanisms, springs and motors, and gate motors, are normal everyday work for us, alongside shopfront locks, padlocks and safes.

The technician tries non-destructive entry first. R350 call-out fee. The technician assesses the job on site and gives you the price before any work starts. Nothing is done until you agree. Payment is by EFT, cash or card. Read what a mobile locksmith costs in Cape Town for more about how quotes work.

We come out to cafés and restaurants across the Cape Town City Centre, along Kloof Street in Gardens, on the beachfront in Camps Bay and at the harbour in Hout Bay, as well as elsewhere in our area. Visit the mobile locksmith in Cape Town homepage for the full picture.

Questions

Can you open our shutter without damaging it?

Non-destructive entry is always tried first. Whether it works depends on the shutter, the padlocks and what has failed. If anything needs to be cut or replaced, the technician tells you and quotes before doing it.

Our manager left with the keys. Can you copy the remaining key for the new manager?

No, we don't cut or copy keys. Because the old keys are still out there, the safer fix is to change the cylinders they open. The new cylinders come with their own keys.

Our shutter motor has stopped. Is that a locksmith job?

For us, yes. Roller shutter motors, springs and mechanisms, and gate motors, are part of our normal work. Send a photo of the motor and tell us what it's doing, and the technician will quote on site.

Need a locksmith to look at it?

If this hasn't solved the problem, our commercial locksmith service covers it. We're a mobile locksmith in Cape Town, so we come to your door. Areas where this comes up often include Cape Town City Centre, Gardens, Camps Bay, Hout Bay.

Sources and further reading

Request assistance

Four quick details. We reply by phone or WhatsApp, 24/7. For anything urgent, calling is quickest.

We use these details only to respond to your enquiry. See our privacy notice. Sending this form is a request for contact, not a confirmed booking.

CallWhatsApp