Lock Repair in Cape Town
Hardware near the Atlantic lives a hard life. A gate lock in Mouille Point that once turned smoothly now grinds. A Sea Point balcony door has stopped latching. A gust slams a Green Point front door so hard that the bolt no longer meets the strike plate. A keypad lock on a short-let goes dark. Caught early, most of these are small jobs. Our technician mends door, window, gate and shutter locks in place, at flats, houses, shops and workshops, and as a mobile locksmith we'll say so honestly when a lock has reached the end of its life.
- 24/7Every day, nights included
- R350Call-out fee
- On sitePrice agreed before work
- EFT · Cash · CardWays to pay
What you notice, and what's usually behind it
| Symptom | Likely cause |
|---|---|
| The key feels gritty, or the lock is stiff outdoors | Salt and grime in the cylinder or bolt work: see corroded locks near the sea |
| The bolt catches on the frame after the door was slammed | A strike plate bent or knocked loose: see doors damaged by strong wind |
| A sliding balcony or patio door won't latch | A worn hook lock, a dropped door or rollers that need adjusting: see balcony and patio door locks |
| A keypad or smart lock is dead or unresponsive | Flat batteries or a failed module: see keypad or smart lock with a dead battery |
| A postbox in the lobby won't open | A worn or seized small cam lock: see postbox and mailbox locks |
| A shopfront door's lock won't throw | The door has dropped on its pivot or closer: see glass shopfront door locks |
| A roller shutter drops by itself or feels like a dead weight | Spring tension has gone, or the barrel and guides want attention |
Check the door, then the lock
Plenty of locks that seem broken are fine; the door around them has shifted. Moving a strike plate a few millimetres, re-fixing a sagging hinge or setting a slider's rollers back to height often cures it with no parts at all. So before anything comes out of the van, the technician watches the door or gate open and close. If a part really has worn through, whether a return spring, a handle follower, a multipoint gearbox or a gate-motor board, we fit a new one, provided it's still made.
Shutters, gates and gate motors
Garage roller doors on the slopes of Fresnaye and Camps Bay, shopfront shutters in the CBD, heavy doors in Salt River and Woodstock workshops: their locks, springs, barrels and motors are all repairable on site, as are the motors driving sliding and swing gates. A gate shared by a complex is common property, so get approval from the trustees or managing agent before we touch it.
Go easy with the spray can
All-purpose sprays can make a lock feel better for a week, then trap sand and salt inside it. Follow the lock maker's guidance on lubrication, and if there's none, don't improvise. A key that needs force is a key about to snap, which would add broken-key extraction to the bill.
What a repair costs
R350 call-out fee. When the cause is clear, the technician prices the parts and the labour, and waits for your yes. If replacing would make more sense than repairing, we'll tell you. EFT, cash or card.
Lock brands we work on
These are the lock and security-gate brands you'll find on most Cape Town doors and gates, sold by Builders, Cashbuild, Leroy Merlin and locksmith suppliers around Cape Town. If yours isn't listed, send us a photo.
- UnionMortice locksets, cylinders, gate locks
- YaleLocksets, padlocks, smart locks
- TrellidorSecurity-gate locks
- CISACylinders, gate and door locks
- Mul-T-LockHigh-security cylinders, padlocks
- dormakabaCommercial locks and key systems
- ABUSPadlocks
- Master LockPadlocks
Brand names belong to their owners and are used only to describe what we work on. We're not an agent of, or endorsed by, these manufacturers.
Where this service is available
We provide lock repairs as part of our mobile locksmith service across Cape Town. Areas we're often asked about include:
Questions customers ask
Repair or replace: how do you decide?
If the trouble is alignment, a loose fixing or one worn part, repairing usually wins. If the mechanism is worn throughout, or badly corroded, a new lock is the better buy, and you'll see the wear before you choose.
Is an aluminium sliding-door lock fixable?
Frequently. WhatsApp a photo of the handle and the lock body on the edge of the door, showing any brand name, and we'll find out whether parts exist.
The gate motor in our complex keeps failing. Will you look at it?
Yes, as soon as the body corporate or managing agent signs it off, since the gate and its motor belong to everyone in the complex.
Request lock repairs
Four quick details. We reply by phone or WhatsApp, 24/7. For anything urgent, calling is quickest.